Products Covered by MSDS


POLY KOTE 80




Date: December 19, 2005
Monolite Blended Products
A division of Squires-Belt Materials Co.
PO Box 152047
San Diego, CA 92102
Office (619) 266-6100  Fax (619) 266-6111
www.monolitestucco.com
Section 1: Product Identification
Manufacturers' Identification SKU:
Product Class:
Trade Name:
 PK-80
Polymer Modified Cementitious Products
Poly-Kote 80
SECTION 2: HAZARDOUS INGREDIENTS

HAZARDOUS COMPONENTS 		 OSHA
PEL PPM  		 ACGOH TLV
(TWA) PPM 		% BY
WEIGHT 		OTHER LIMITS
RECOMMENDED
Gypsum Cement 15 mg/ m3  10mg/m3  15-40 N/A
Silica Sand  N/A N/A N/A N/A 
Hydroxyethylcellulose 450 kg/m3 N/A  (20 c,10g/l) N/A
SECTION 3: PHYSICAL DATA
Boiling Range:  N.A. 
Vapor Pressure:  N.A.
Vapor Density:  1.38 - 1.40 g/cm3 (20 c) 
Evaporation Rate:  N.A. 
Weight Per Gallon:  N.A. 
%Volatile by Volume  N.A. 
%Volatile by Weight:  N.A. 
SECTION 4: FIRE AND EXPLOSION HAZARD DATA
Flammability Classification:  N.A. 
Lowest Flashpoint  NOT DETERMINED 
Extinguishing Media:  Water spray jet / Foam 
Fire and Explosion Hazards:  N.A. 
Fire Fighting Procedures:  Water spray jet / Foam 
SECTION 5: HEALTH HAZARD DATA
Effects of Overexposure:  Inhalation: Dust from sanding can cause headache, nausea, and irritation of nose, throat or lungs.
Eye Contact: Slight irritation.
Skin Contact: Prolonged or repeated skin contact with wet material can cause a slight irritation.
Primary Routes of Entry:  Inhalation, Skin and Eye Contact 
Emergency and
First Aid Procedures: 		 Inhalation: Remove to fresh air.
Eye Contact: Flush eyes with running water for at least 15 minutes. Consult a physician if irritation persists.
Skin Contact: Wash affected area thoroughly with soap and water. Consult a physician if irritation persists.
Ingestion: If swallowed, give at least two (2) glasses of water and consult a physician. Never give anything by mouth to an unconscious person. 
SECTION 6: REACTIVITY DATA
Stability:  Stable 
Hazardous Polymerization:  None 
Hazardous Decomposition Products:  None 
Incompatibility (Materials to avoid):   
SECTION 7: SPILL OR LEAK PROCEDURES
Personal Protection:  See section V Health Hazard Data 
Procedures:  Use respiratory protection if dust becomes airborne. 
Waste Disposal:  Dispose of in accordance with applicable Federal, State, and Local
regulations. Keep spills and runoff out of municipal sewers and open
bodies of water.
SECTION 8: SAFE HANDLING AND USE INFORMATION
Respiratory Protection: Non-required for normal use of this product. If material is sanded or
ground when dry, approved respirators for dust should be provided and
used. As with any safety product, workers using respirators should be
trained in the proper selection, use and care. 
Ventilation: Local Ventilation.
Protective Gloves: Rubber or neoprene gloves for protection against wet material.
Eye Protection: Use goggles. Full flow eyewash station.
SECTION 9: SPECIAL PRECAUTIONS
Squires-Belt Material Co. as a blender of processed material in the state of California is required by Proposition 65 to warn that one or more of the components contained in this product could contain chemical known to the state of California to cause cancer, birth defects or other reproductive harm. The state of California requires this warning in the absence of definitive testing, to prove that the defined risks do not exist. We believe this product complies with all other applicable state and federal laws and regulations governing manufacture, distribution and intended use. This information is furnished with out warranty, representation, inducement or license of any kind, except that it is accurate to the best of Squires-belt Material Co. knowledge or is obtained from sources believed to be accurate. Customers are encouraged to conduct their own test. Before using any product, read labels and instructions.
Monolite Stucco Products
Manufactured by Squires-Belt Material Co.
4567 Federal Blvd., San Diego, CA 92102 • 619-266-6100 • www.monolitestucco.com